View Single Post
Old 11-03-2012, 08:54 PM   #5
Registered User
mkodama's Avatar
Join Date: Oct 2006
Posts: 33,142
Originally Posted by Arnezie View Post
How essential is a press to remove the bushing? I don't have one
You don't replace any bushings. They are all preinstalled into the control arm so that you don't have to use a press, and would likely be damaged if you did try to reinstall.

If you are talking about extracting the threaded end of the ball joints from the subframe and spindle, then yes, an extracting device is essential for removal and cannot be done without. Do not use a pickle fork, use the screw type extractors.

mkodama is offline   Reply With Quote