View Single Post
Old 11-13-2012, 04:24 AM   #2
Zero. Leaks.
Solidjake's Avatar
Join Date: May 2008
Location: NYC
Posts: 30,819
My Ride: '02 330i 6MT
The solder joint is bad on the back of the circuit board or the connection from the ring to the wire harness is bad. If you have only one positive and ground wire for both angel eyes on one side then it's the solder issue. You can fix it by taking out the old solder from the back of the ring and put in new.
Solidjake is offline   Reply With Quote