View Single Post
Old 11-13-2012, 06:42 AM   #6
flashmeow
Banned User
 
Join Date: Apr 2008
Location: Dallas, TX
Posts: 2,220
My Ride: E30-E46-E90-E90M-F30
Quote:
Originally Posted by dmax View Post
I doubt that part of tb is sold separately. Maybe you can see with yours whether you'd be able to buy one from a junk yard and replace just that part...or at that point, honestly, probably just replace the TB.

I'll check realoem, but as I recall, it's a single assembly.

Only other thought I have, not really seeing your 'break' live, is that maybe there's a way to drill a hole and 'pin' the end of the cable in there. As long as the ball on the end of cable is holding in there firmly, you should be fine...but I can't tell whether you have enough 'meat' left to hold it there.

GL...hth
This. Sorry op. Ur only solution is to fix the plastic as best as u can. I recommend using JB Weld and slowly and little by little build up the spot.

sent from my dahc-6900 using Bimmer App
flashmeow is offline   Reply With Quote