View Single Post
Old 11-13-2012, 11:57 AM   #36
taylor192
Registered User
 
Join Date: Feb 2012
Location: The Best Place on Earth
Posts: 1,755
My Ride: 2003.5 M3
Tip:

If the bushing is really stuck and the MIS tool won't push it out then you can drill and cut the bushing off. I had to do this yesterday for a FCAB that was absolutely stuck on the front LCA. Drilled through all the rubber so the inner part of the bushing would separate from the outer, then used a hacksaw to cut the inner and outer parts of the bushing off.
taylor192 is offline   Reply With Quote