I just bought two clamps from auto parts. Lunch's ready so I'm about to eat, a well needed break. But it sounds simple, I'm going to put the clamp in the middle and tighten it. When you say "put the bushing on the other side of the trailing arm" do you mean from the inside or the outside? From the inside pushing towards the exterior of the car, or from the exterior pushing it in towards the car. If you skip to 4:10 that would be what I consider putting the bushing in from the outside.
If it is from the outside though would I have the put the rtab also on the outside because it's going to be nearly impossible placing it on the inside to pull from there.
Last edited by justanotherone; 11-13-2012 at 02:31 PM.