View Single Post
Old 11-13-2012, 05:30 PM   #4288
DeclanM3
Registered User
 
Join Date: Aug 2008
Location: Sydney
Posts: 3,354
My Ride: 332Ci
Quote:
Originally Posted by zha50 View Post
Retrofit I was completing last night .... So much harder to fit it in than i thought.

Projector still sits a little low in relation to the fixed shroud but it does not affect the light output for the distance (foreground is slightly cut out. Nothing a fog light wont fill up.

Wonder if the shroud would heat up too much / meltt tho being beamed constantly. Maybe just use it and see?

The light output and cutoff is just awesome! Purple flicker too! 5000K Morimotos, cheapies.



The "step" and cut-off with the purple fringe.


No glare above cutoff


Purple flicker inside the cutoff area
I'd try fix up the level if possible. It will forever annoy you and no doubt people will comment on it

Also, it will completely fk your highbeam output as the high and low angle are adjusted together.

I don't even know if your headlight will adjust high enough to have a proper output with your projector at that angle. Be very careful when adjusting as you can easily break the adjustment if you go too high.
__________________


DeclanM3 is offline   Reply With Quote