put the bushing towards the inside of the car and use the MIS tool to pull it into the trailing arm, that was the easiest way for me to do it.
Originally Posted by taylor192
To install the bushing use the larger square block so the bushing can be pulled in, with the larger square block eventually hitting the RTA indicating the bushing is pulled into the correct position.
2001 ///M3 Cabriolet Titanium Silver/Imola Red/6SPD
2007 Audi RS 4 Daytona Gray/Black/6SPD (SOLD)
2007 Audi A4 Avant Light Silver/Platinum Grey/6SPD (TRADED)
1999 Audi A4 Avant Light Silver/Black/5SPD (TOTALED)
2001 Honda Prelude Satin Silver/Black/5SPD (TRADED)