View Single Post
Old 11-18-2012, 09:48 AM   #2
Registered User
Join Date: Apr 2010
Location: Reading, PA
Posts: 180
My Ride: 2003, 325 XIT
Its not to hard to do. I've replace 4 on the car. No need to remove the diff housing to do this. Find a good DIY on this site for the axle removal. Pop out the seal and replace with a new one. I'd drain the diff fluid and fill with new while you are at it. Also would be a good time to consider replacing CV boots. You will need a new axle end nut at the hub.
325xittt is offline   Reply With Quote