View Single Post
Old 04-09-2004, 12:06 AM   #47
1HOTBMW
Registered User
 
Join Date: Jun 2003
Location: LONG ISLAND, NY
Posts: 333
My Ride: 2003 325ci
Send a message via AIM to 1HOTBMW
Quote:
Originally Posted by bigjae1976
One last thing. The two leads on the camera connector go to a switched +12V and ground, correct? I think you wired the camera to be on at all times correct?
No, my camera is only on when my clarion head unit is on. The two leads that come off from the camera are a positive and negative. The negative I grounded to the same spot as my deck and the positive is spliced into the power for my clarion deck(the yellow power wire from the deck to the tuner unit under my drivers seat), so the camera is only on when my deck is on. The easiest way is to just ground it to a convenient spot and then to run the power to where your video screen or headunit gets switched on power from because you will always be using the two together. Hope this helps. -Michael.
__________________
1HOTBMW is offline   Reply With Quote