View Single Post
Old 11-20-2012, 04:56 AM   #184132
sillieidiot
Registered User
 
Join Date: Sep 2004
Location: the OC
Posts: 44,153
My Ride: '06 AW 330ci
Send a message via AIM to sillieidiot
Quote:
Originally Posted by XKxRome0ox View Post

so this is what happens when your "orange" bulb is really old
and the contact point is all melted

the bulb was out on the driver side ... but replacing the bulb didn't fix it
i put in new bulbs for both sides but original problem socket won't light up unless if i push the bulb in and hold it in with some pressure
i swapped the turn signal sockets for now since i need a visible LEFT turn signal in the front, not so much for the right
nah, it's not because the bulb is old. it's because the bulb is running too hot. just pull the metal tab up on the bottom with a flat. that should give it enough contact for it to work.
__________________
I like to reply to threads with 0 posts




Have a lighting problem? Read this first:
Lighting-related Troubleshooting Guide
sillieidiot is offline   Reply With Quote