11-26-2012, 08:56 PM
|
#13
|
|
Registered User
Join Date: Dec 2007
Location: Los Angeles
Posts: 1,836
My Ride: 323i ZSP/ZPP
|
Quote:
Originally Posted by peytonracer4
Did you remove the end links at all? If so go back in and tighten them again. Even if they feel tight with your hand get your wrenches out and do it.
You'll need two wrenches. One to hold it while you tighten.
13mm I believe.
|
I'm guessing End Links as well.
17mm or 16mm depending on which brand you have.
OP, make sure to safely get both wheels off the ground before you tighten the end links...while you're there you may as well take them off, and inspect the ball joints on the end links (they should be pretty firm, a blown end link will be floppy), and will need to be replaced.
Good Luck.
__________________
Bewahren Sie ihre ultimative fahrmaschine
Quote:
Originally Posted by ///MPR77
Some say his notoriety is so profound, that he was able to drop the e46 in his name, and just like "The Highlander" there can only be one....all we know is he is called "Mango"
|
|
|
|