View Single Post
Old 11-27-2012, 02:23 PM   #2
10 years plus club
Mango's Avatar
Join Date: Mar 2006
Location: Southern California
Posts: 24,397
My Ride: 2016 Lexus
You likely have two mechanical tensioners. If so you'll need a plain jane 15 or 16mm socket (forgot which) or a 5/8" works fine as well. Thats to release the belts. You may need a torx bit to remove the actual pulley from the tensioner. Either case, make sure you have a full socket set, torx set, and allen head set. you'll need all of them anyway to work on these cars. GL!!
Complete Cooling System Guide | Pro Maintenance | Suspension Refresh | New Owner?

Enjoy a lifetime free of problems
Support our DMAX:
Mango is offline   Reply With Quote