View Single Post
Old 11-29-2012, 07:17 PM   #8
jfoj
Registered User
 
Join Date: Nov 2009
Location: Fairfax, VA USA
Posts: 10,034
My Ride: '06 330CiC, '03 M5
Codes not related.

Cam sensors do go bad.

Suggest you try to check your MAF connection terminals to make sure they are tight. Have heard about loose MAF terminals on the E46 from time to time.

You may need to remove the terminals from the connector to slightly tighten them with pliers, but be VERY careful and do not mix up terminals in the connector.
__________________
Solve your misfires, lean codes, rough idle - http://forum.e46fanatics.com/showthread.php?t=897616

Fuel pump failures - http://forum.e46fanatics.com/showthread.php?t=929501

Temp Info - http://forum.e46fanatics.com/showthread.php?t=964491

Hidden OBC Menu - Check Voltage, Temps, Fuel Level - http://forum.e46fanatics.com/showthread.php?t=239619

E46/E39 GM5 Door Lock Info - www.bmwgm5.com

Lower hose fan switch O-ring - BMW #13621743299
jfoj is offline   Reply With Quote