View Single Post
Old 11-29-2012, 08:35 PM   #9
Registered User
Join Date: Jun 2012
Location: El Salvador
Posts: 60
My Ride: 325Xi 2001
Originally Posted by jfoj View Post
Codes not related.

Cam sensors do go bad.

Suggest you try to check your MAF connection terminals to make sure they are tight. Have heard about loose MAF terminals on the E46 from time to time.

You may need to remove the terminals from the connector to slightly tighten them with pliers, but be VERY careful and do not mix up terminals in the connector.
Thanks jfoj, will try as you suggested. I will also order the CPS intake side, wierd how it started giving me issues after I replaced the CPS exhaust side (due to codes as well). Guess people are right when they say change them in pairs
fernando629 is offline   Reply With Quote