View Single Post
Old 11-30-2012, 06:28 PM   #10
willsbma
Registered User
 
Join Date: Jul 2006
Location: north babylon NY
Posts: 2,528
My Ride: 99 323i
Quote:
Originally Posted by repoman89 View Post
I'm not sure what you mean by fitting - as far as I could tell, the pressure hose just bolts into a thread on the pump and is supposed to just lock in there. I had to reuse the mounting bracket, but other than that I didn't see any removable parts. Did you have an LF30?
The fitting I am referring to is a bushing. The bushing that came on my replacement pump wasn't the correct size. I was able to tighten it, but it would not lock the hose into place. I swapped the bushing from my old PS pump into the replacement and I was able to tighten the hose properly. I am betting this is/was your problem because you would be able to make it very tight, but fluid would leak out everywhere.
__________________
Matte Black Kidney Grilles | Smoked Tails & Corners | Mtech II Bumper | Hotchkis Springs | ACS Roof Spoiler | M3 Spoiler | 20% Tint
WTB: Black sun visors & grab handles - PM ME!

I have P.A. Soft and a 20-pin adapter. Only used it a few times but pm me if you need anything coded!
willsbma is online now   Reply With Quote