View Single Post
Old 12-01-2012, 08:35 AM   #7
Registered User
Join Date: Dec 2006
Location: belgium
Posts: 877
My Ride: 323ci
Here you see what I've done to work away the cables in an easy and fast way.
Close to the bottom of the amp, I made 2 oval holes (L and R)

On the bottom side I milled out a big sloth to place the cables in.

Once I placed the cables there, I'm going to screw a thin plate on there so the bottom side will look descent too.

I chose glass to work out the separation between the sub-box and the amplifier.
The glass is hardened, 12mm thick.
I chose this solution, so it will maybe look bigger, cause it's all in one space.

I milled out a ditch on the left and the right.
Then I let someone bend me a lip on the alu of the amp and subbox.
The glass rests between them. Offcourse I'm going to kit it all off when the subbox is closed.

Off course I need to have some material left and right to screw the box tight.
This I'll solve by glueing an aluminium bar against the glass.

Here you can see that this bar is also tightened left and right.

In that alu I can tap screwthread to screw my cover on. On the side I'll place long woodbolts and on the back (hinge) I need to straighten it out with polyester, then it's possible I also tap in some screwthread.

robolop is offline   Reply With Quote