View Single Post
Old 12-01-2012, 08:36 AM   #8
Registered User
Join Date: Dec 2006
Location: belgium
Posts: 876
My Ride: 323ci
I changed the plate which is on the amplifier. I widened it a bit more.
I also added a second plate underneath it. I've done this to give it a more tough look.
The sides of the thick plate will get polished, and the thin plate will be sprayed in black.

On the sides I foresaw other plates with fine openings.

About those openings, this will provide some more cooling for the amp, and off course look even better.
You can also see that the plate is placed on 4 rubbers, ON the amp.
On the outside I will add 4 alu busses, but need to let them make first.

robolop is offline   Reply With Quote