View Single Post
Old 12-03-2012, 04:57 PM   #1
thehittman007
Registered User
 
Join Date: Nov 2012
Location: Lehi, UT
Posts: 5
My Ride: 2002 M3 Manual
Viper alarm removal no start

I am new to the forum and just bought a 02 M3 that came with a viper alarm with remote start and I made the mistake of removing it..............wished I had left it alone. My car won't start now and I am sick. I thought I was careful and respliced the wires that required resplicing on the original harness, but I must have missed something. I am freaking out because I don't really have the money to tow to a dealer and troubleshooting. I believe it has to be something simple and hope I can get some good technical advice.

Yeah, I should have left it alone.........I know.

I am a little confused about the wiring in the electical box under the hood on the drivers side near the firewall with four screw and black cover. There was a couple of wires spliced that I just cut the connecting viper wires and taped up. There are some other splices in there that look like factory splices compared to the butcher job that the viper installer did. Are the splices in this box with a green cap a factory job?

Besides that, I patch a splice on the clutch position sensor and the brake pedal sensor and the sensor on the ignition key cylinder ( I don;t know the proper terminolgy....sorry).

I am getting all the instrument lights etc in the last position before cranking. In the cranking mood I get nothing.

I did notice that the mileage reading in the odometer changed to a symbol that resembles a cross or something like this ... ... : ... ...

is this a code?

Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
thehittman007 is offline   Reply With Quote
Ads by Google

Guests, get your FREE E46Fanatics.com membership to remove this ad.