View Single Post
Old 12-05-2012, 09:42 AM   #22
GT172I
Registered User
 
Join Date: Mar 2009
Location: CO
Posts: 131
My Ride: 2004 330Ci, 335is
I'd agree with the previous posters and the sponsors (most really do know what they're talking about). The OEM's can't be beat for that initial bite outside of track conditions. The price you pay is dust, anything with less dust will have less cold bite. There are plenty of other compromises you will have to make too so figure out your priorities since there are a lot of offerings with perks in the other areas.

High dust - Low dust
Initial cold bite - Heat/fade resistance
High pad wear - High rotor wear
Cheap - $$$
Ceramic - Semi-Metallic
Squeal - Silent

From what you've described you're looking for above, I'd say OEM's are probably your best bet. Combine that with some Poorboy's Wheel Wax and you should be happy all around. Makes it way easier to hose off the dust with a little/no agitation.
__________________
APEX ARC-8's | UUC EVO3 SSK | UUC TSE3-L | H&R sways
Stebel Truck Horn | Misc cosmetic stuff
GT172I is offline   Reply With Quote