E46Fanatics - View Single Post - Non continuous OBD monitors won't set
View Single Post
Old 12-08-2012, 11:01 PM   #32
Registered User
Join Date: Nov 2012
Location: WNY
Posts: 34
My Ride: 02 325i
Found the sensor in question to be loose in the bung. Tried tightening it and running the car but it made no difference on voltage readings. I replaced it due to possible damage. Voltage readings seem to be moving around a little now and read perhaps what they should at that sensor.
The pending code also cleared. I need to do a drive cycle and see if anything changes with the obd monitors
jessehell is offline   Reply With Quote