View Single Post
Old 12-09-2012, 09:19 AM   #1
76m2002
Registered User
 
Join Date: Nov 2005
Location: Rochester, NY
Posts: 81
My Ride: 2001 325xiT
Ball Joint separator?

Has anyone found a good tool for removing ball joints? I want to reuse the ball joint on my e46, so don't want a pickle-fork, and don't want to use a torch. I tried smacking the control arm with a BFH, but could not get the ball joint to drop from the steering knuckle. I tried the the Horror Freight ball joint separator (http://www.harborfreight.com/3-4-qua...tor-99849.html), but it wore out after removing one tie-rod. The threaded driving bolt for the HF tool started grinding into the soft metal of the receiving arm of the tool, instead of forcing the two arms apart. This is for an outer ball joint in a control arm of a 325xiT, so I don't have much room over the top of the threaded rod of the ball joint, and can't use the larger tools that look like giant "C" clamps.
Thanks for any suggestions.
76m2002 is offline   Reply With Quote
Ads by Google

Guests, get your FREE E46Fanatics.com membership to remove this ad.