View Single Post
Old 12-10-2012, 12:32 AM   #1211
hassmaschine
Registered User
 
Join Date: Sep 2011
Location: Ferndale, WA
Posts: 198
My Ride: '91 325ix
Quote:
Originally Posted by p0lar View Post
I've also got the dreaded 'No coding data retrieved' error on my '04 M3 (6MT) when trying to connect to the IKE module.

Was anyone able to figure this out apart from luthers and Terraphantm?

If not, there are a few options I would like to have investigated by someone who's familiar with NCSExpert and PA Soft and has an E46 325 or 330 using PA Soft version 1.4.0.9.

My thinking is this, that PA Soft isn't doing anything that NCS Expert can't; thus, if someone could read the NCS Expert config out, save it, then make a change with PA Soft, then read out the NCS Expert config again and run a diff against it, it wouldn't be an issue whatsoever.

Is anyone game to help a fellow coding enthusiast out?
just use NCS dummy with NCSexpert. there's almost nothing really interesting you can do in PA soft to an E46 M3 cluster anyway.

also, there are things that you can't change in that particular cluster. I'm thinking that's the reason you're getting an error message.
hassmaschine is offline   Reply With Quote