E46Fanatics - View Single Post - Non continuous OBD monitors won't set
View Single Post
Old 12-11-2012, 05:32 AM   #38
OEM ///Member
Join Date: Nov 2009
Location: Fairfax, VA USA
Posts: 23,239
My Ride: 330CiC, M5, X5, E93
Not exactly your issue, but you may have a similar problem?? Not sure how these issue happened either??


There was another thread I cannot seem to find where the DME pin was totally melted in half inside the DME. I think the person actually repaired the melted pin with a wire jumper and was able to get things working??

The question is why did/do these problems happen and what was done to resolve them.

Again, this may not be your issue, but may be work popping to the connectors and top of the DME for inspection??
Solve your misfires, lean codes, rough idle - http://forum.e46fanatics.com/showthread.php?t=897616

Fuel pump failures - http://forum.e46fanatics.com/showthread.php?t=929501

Temp Info - http://forum.e46fanatics.com/showthread.php?t=964491

Hidden OBC Menu - Check Voltage, Temp, Fuel Level - http://forum.e46fanatics.com/showthread.php?t=239619

E46/E39 GM5 Door Lock Info - www.bmwgm5.com

Lower hose temp switch O-ring - BMW #13621743299
jfoj is offline   Reply With Quote