View Single Post
Old 12-18-2012, 01:53 PM   #1
Registered User
Join Date: Mar 2011
Location: CA
Posts: 4
My Ride: 03 BMW m3
Rally Road porsche brembo M3 kit complete-Kit is sold

Up for sale is a Rally Road Brembo Porsche BBK conversion kit! This is a complete kit, was installed on my car for over a year. The kit includes the following:

Front brakes:

Boxster S front calipers (machined by Rally Road to accept their bracket)
Rally Road bracket
Rally Road extended SS brake lines
Porsche Textar brake pads
OEM ZCP 345mm BMW brake rotors

Calipers were purchased used, no leaks or other issues; bracket/lines purchased new; pads in good shape. ZCP rotors purchased new, have about 30k miles and at least a dozen track days. Just turned, still in spec

Rear brakes

Boxster S rear calipers
Rally Road bracket
Rally Road extended SS brake lines
Porsche Textar brake pads
Power Slot brand, slotted and cryo treated oem sized/vented 328 mm rotors

All calipers off same low mileage donor car, one rear caliper dust boot is torn, should replace all dust boots on pistons; easy and cheap; bracket/lines purchased new same as fronts. Pads are recent. Rotors have about 5k miles, only a couple of track days.

Best reason to convert to this kit is if you want to track your car, even occasionally! Street brake pads can't cope with the track, except maybe your first day. With the Brembo calipers, switching from street to track pads is super easy, takes about a minute if you have a (reasonably cheap) pad spreading tool.

For the fronts, I have a set of Porterfield R4 pads (used once) and a half used up set of Performance Friction 06 pads (awesome track pads!).

For the rear, I have a just purchased (used one day) set of Performance Friction 06 pads.

Finally, I obtained a set of p0lar titanium backing plates that will keep your calipers and fluid cooler on track days. These are brand new!

If you were going to buy all this stuff on your own:

Porsche Boxster S/Carrera 996 calipers-700ish for a used set, another 75 to machine the fronts to work with the bracket, plus shipping it back and forth to RR to do the job
Rally Road brackets front and rear 350
Rally Road lines 130
Textar pads F/R 150 new
ZCP rotors 430 new from Tischer, maybe 200-250 for a used set
Power Slot rear rotors were 200 new, maybe 100-150 for a used set
Porterfield pads were 200+ new, used one day
PF pads are 250-275 an axle new; rears are used one day, fronts 1/2 used
p0lar plates were 65 new, unused
plus shipping, tax, paypal...

About 2700+ so far...

This is a great looking kit for street and track! A great entry level BBK for someone who is been bit by the track bug without going bonkers for a full Brembo/Stoptech BBK that will cost 5-7+k! The best part is this kit is that it uses or can use OEM rotors which are dirt cheap compared to the 2 piece compound rotors on the big boy kits. You can get OEM rotors cheap and if you hunt around, find killer deals on aftermarket 2 pc or Euro rotors used. There are a couple of those killer deals on this forum right now! There is a PowerBrake ZCP group buy going on for ZCP front rotors and a set of Performance Friction rear 2pc rotors used going for a song...

Last edited by jimmione; 01-03-2013 at 10:27 PM.
jimmione is offline   Reply With Quote
Ads by Google

Guests, get your FREE membership to remove this ad.