To remove non sport steering wheel
Behind the steering wheel there are two torque bit screws that hold in the air bag. Remove them.
Disconnect all the connectors
Remove the one nut that holds the steering wheel on I believe it's either a 16 or 17mm socket (I don't remember) with a breaker bar or impact.
Reverse for installation of the sport steering wheel.
Air bag install is different. There are push pins that hold it in place in the same place the torque bit screws would have been rather. You push the pins inward with a horizontal motion with a flat head to get the air bag to set in and lock into place
Last edited by stookin; 12-20-2012 at 11:28 PM.