View Single Post
Old 12-23-2012, 03:44 PM   #10
Registered User
Join Date: Sep 2006
Location: FL
Posts: 9,503
My Ride: '03 540i/6 M-Sport
Originally Posted by ImSoFreaknWhite View Post
I just recently purchased 18x10 square set up for my m3. The front sticks out of the fender a bit too much, and the back looks fine with a 12mm spacer. I was wondering if any of you guys had any idea of a good amount of camber to run in the front to get the tire tucked under the fender as much as possible but without having to get new tires every 3,000 miles. I never track the car it would be strictly a street driving set up.

@Joe do you have any idea what that Tiag M3 has camber wise in the front? you mentioned he had a 18x10 square set up as well?
Need a pic like this but maybe not so close up so I can get a better idea of the current camber setting....



'02 JR/Naturbraun 330i M-Tech I | M-Tech II Fr. | Supersprint Headers | Remus Sport |
.....| SM Flywheel Conv. | 18" CH'ish reps | Short Shift | Orion V2.5 | RCR LED Tail |

'03 JB/Schwarz 540i M-Sport 337 | Decatted | Short Shift | Carbon Trim | JL Audio | V1

BartenderPlease is offline   Reply With Quote