Thread: Powder coating
View Single Post
Old 12-28-2012, 01:35 AM   #17
steve.k
Registered User
 
Join Date: Dec 2010
Location: NSW, Australia
Posts: 1,329
My Ride: 05' 325Ci, 13' WRX
1 can of color for each wheel + 2 cans of clear + 2 cans of primer. Mask up around wheel, wet sand first with 400-600 then smoothen with ultra high grit (1000+) until very smooth. Use a paint surface cleaner (degreaser) to clean after sanding. Primer 2 coats, paint 2-3 coats, clear 2 coats. Wait minimum half hour between coats. If you want to be very anal you can also lightly wet sand with very high grit in between coats (when dry).
steve.k is offline   Reply With Quote