View Single Post
Old 12-31-2012, 01:18 AM   #16
cvx5832
Registered User
 
Join Date: Mar 2009
Location: Walnut Creek, CA
Posts: 2,200
My Ride: 325Ci, 325Cic, C300
Quote:
Originally Posted by pawelgawel View Post
ICV needs lubrication after a clean. seafoam is an actual lubricant as well so it does both, clean and lube.

The carb cleaner might have just cleaned up the residue and lube within and dried it up... with time the dirt would most likely creat the problem you're experiencing now.

Try to take it out and use some wd40. spray it well on the inside.. let it sit a little and see if that works.

or just get seafoam and try that instead. The barel on the inside should flop freely.

Sent from my SGH-I727R using Bimmer App
This. Same experience. My car started stumbling after a few miles after cleaning the ICV with brake/carb cleaner. I then also lubricated it (used PB Blaster on mine) and never got the issue again.

Agreed, that mechanism functions better lubricated.
__________________


cvx5832 is online now   Reply With Quote