ICE ICE POLO (ROBolop Design)
View Single Post
01-05-2013, 03:04 AM
Join Date: Dec 2006
My Ride: 323ci
View My Garage
I let someone make me a set of alu little busses, to go in between the amp and the EQ.
I'm planning of polishing these, so they shine like a mirror. Like that I'll get a nice contrast with the matt alu plate on the bottom.
The 4 who are a bit longer, holds everything that's on the amplifier, in place.
This will be the coverplate which will rest on the glass.
I made this one in 8mm thick MDF wood.
Off-course I made the 2 holes as big as possible, so you can see as much as possible of the install.
Because the middle of the coverplate is quite wide, I was afraid that I'd loose the effect to see from the front, to the back. But it's really ok, it's still looks fine.
Off-course I'm going to add some lighting in there too.
Here are a couple of things I picked up from the motorhos in Essen (DE)...
Last edited by robolop; 06-15-2013 at
View Public Profile
Find more threads by robolop
Find More Posts by robolop
Leave feedback for robolop (0)