View Single Post
Old 01-05-2013, 07:19 AM   #255
drrwise
Registered User
 
Join Date: Mar 2011
Location: ridgefield ct
Posts: 2
My Ride: e46 m3
Over on the m3 forum beavis found a way to apply foam reinforcement to the front two mounts as well. He took out the seatbelt bolts and applied foam through a smaller gauge hose.

http://www.m3forum.net/m3forum/showp...6&postcount=71

I pulled the bolt (it's a T50 or thereabouts) and there is definitely a cavity there, it lines right up with where the front mounts are. I have the extra kits but am going to double check when I drop the subframe, take a look from underneath before I put it in.

Personally I am going the epoxy route for the TMS plates, it seems like recently several welded plates have failed from what looks to be corrosion._nr_
drrwise is offline   Reply With Quote