View Single Post
Old 01-09-2013, 08:22 PM   #21
dmax
Registered User
 
dmax's Avatar
 
Join Date: Aug 2006
Location: NJ
Posts: 22,823
My Ride: '99 328i 1.04646 mu
In that situation, and only then, I'd give the sanding a shot before replacing the radiator...but it's the first I've heard of that issue here...and I read a lot here. But, that said, my concern was whether he had the decent skill. If you're sanding plastic to then have a pressure seal from o-ring, you'd need to be very careful and finish with a very fine sandpaper.
__________________


Performing at the Comedy Cove--595 Morris Ave. Springfield NJ reservations 973 376-3840

A recent set

dmax on the radio every Wednesday 7-9 p.m. NYC time. Call in! (661) 449-9340 watsonnwatson.com

Last edited by dmax; 01-09-2013 at 08:22 PM.
dmax is offline   Reply With Quote