E46Fanatics - View Single Post - Intake Problem code P1192
View Single Post
Old 01-09-2013, 08:23 PM   #19
Registered User
Join Date: Jun 2002
Location: San Juan
Posts: 86
My Ride: 330i 2001
Originally Posted by eph6jonprice View Post
Best way I can describe it is to say it's oriented in the picture as if you were sitting in the drivers seat and your dash and firewall were seethrough, it would be right in front of you a little to the right. If looking at the engine (standing in front of the car looking down), if you are looking at where your intake boot ends (at the throttle body) then the left side of this picture would be right above there, and the front of the picture is what you can't see because it's facing the firewall. The tip of my screwdriver in this picture is pointing to the nubs you see on the left side of the previous one. Hope that makes sense, and hope that helps, I know this can be confusing so happy to do what I can!!!
Got it now - perfect thanks - from that point one hose goes to the firewall and the other one (the thin one) goes to the intake boot... can't see where it goes under but it will be quite a job to clear that area... I will let you know... When you said yours was disconnected - what did you mean?? broken??. off??,

Again -- thanks for your help..
figuej is offline   Reply With Quote