View Single Post
Old 01-13-2013, 01:51 PM   #7
simonbodner
Registered User
 
Join Date: Dec 2012
Location: new york, ny
Posts: 13
My Ride: BMW e46 05 330xi
Changing mounts

Quote:
Originally Posted by winston330xi View Post
I just had mine replaced recently. The shop did use an air chisel to force it out and tried hammering it in with a rubber mallet. It did not work and they ended up fabricating 2 metal strips for each end and with a long bolt in between forcing the mount in. Same principle as the bushing tool.

Sent from my MB860 using Bimmer
I am looking to change all of the mounts possible at the same time, I have a 2005 330xi and have vibration at idle and odd rear wheel stumbling when going above 65mph in a turn. I figured the motor mounts (at 99k miles) are due to be changed, and the rear trailing arm bushings should be swapped (that should correct fast turning rear wheel issues). Also to note 2k miles ago, I got new Goodyear tires from sears put on.

When it comes to transmission mounts ... I have the GM Automatic transmission, do I only need to change the Gearbox rubber mount as shown bellow?

http://parts.bmwofsouthatlanta.com/s...=gearbox+mount

If so, how long will it take, and is it hard?
If not, what mounts should I get?_nr_
simonbodner is offline   Reply With Quote