View Single Post
Old 01-14-2013, 07:04 AM   #1
PITT M3 RR
Registered User
 
Join Date: May 2009
Location: Pittsburgh PA
Posts: 100
My Ride: E46 M3
Will I need adjustable camber arms?

I have PSS10s on the way, I don't plan on slamming the car by anymeans. I bought them to tighten up the car a bit and because the stock suspension has 109K. I drive the car on the street 90% of the time.

I dont want to kill my tires with an un-needed aggressive setup only to be used on the street. So will I need camber arms if I come down maybe an inch front and rear or will stock adjustability not be enough?

Thanks
__________________

UUC SSK / AFE STG1 Intake / AKG Red Motor mounts / AKG Red Tranny mounts / AKG Red Subframe bushings / AKG Red Differential bushings / AKG Red RTABS / TMS Subframe reinforcement / Custom in trunk subframe structural brace / Bilstein PSS10's / Ground control camber plates / Turner RSM

Last edited by PITT M3 RR; 01-14-2013 at 07:05 AM.
PITT M3 RR is offline   Reply With Quote
Ads by Google

Guests, get your FREE E46Fanatics.com membership to remove this ad.