View Single Post
Old 01-14-2013, 02:44 PM   #5
dualbob103
Registered User
 
Join Date: Sep 2009
Location: CA
Posts: 313
My Ride: Mums
Quote:
Originally Posted by JonJon View Post
Above guys have it right.

Turn water off

Cut off shut off
http://www.homedepot.com/h_d1/N-5yc1...1#.UPJCTmfzHmQ

Make sure water is out of pipe (push down on it a little)

Sweat on an adaptor like this:
http://www.homedepot.com/Plumbing-Pi...1#.UPJBdWfzHmQ

Install a hose bibb
http://www.homedepot.com/h_d1/N-5yc1...1#.UPJCHGfzHmQ


If you want, you can find a Hose bibb that is direct solder on too or if you hate soldering, get compression fittings (just make sure you practice and install tight, but not too tight and once a crush washer is used, you never reuse it)
thanks guys, I torched it out and put in a cut out valve like the one jon jon posted
dualbob103 is offline   Reply With Quote