E46Fanatics - View Single Post - Enco B046 - Dynavin Clone
View Single Post
Old 01-15-2013, 03:56 AM   #1972
Registered User
Join Date: Dec 2012
Location: Toulouse (France)
Posts: 103
My Ride: 330CD
So here's my system so that people can see what the problem is...

The back of the 046 unit connected to the long "fakra" cable going back to the amp in the trunk.

The mysterious blue wires coming out of the unit with an "ANT" label on the right (coming out of the 046) and a "AMP CTRL" label on the left and going back to the trunk of the car, I also have these on the short cable that painbreak has used for the front connexion...do you need to connect them together ?

Now we're in the trunk of the car with the back part of the long "fakra" cable connecting where the BM54 radio module was...you can see the blue wire which I could connect to the "ant" connector on the front.

A global view of the boxes in the trunk with the GPS drive, the CD charger, they are still both connected, perhaps I should disconnect them from the loom ?

jchuillier is offline   Reply With Quote