View Single Post
Old 01-15-2013, 11:48 AM   #9
VMRWheels
Sponsor
 
VMRWheels's Avatar
 
Join Date: Sep 2004
Location: Anaheim, CA
Posts: 9,988
My Ride: 1:25 Scale Enzo
Send a message via AIM to VMRWheels Send a message via Yahoo to VMRWheels
Quote:
Originally Posted by vinndubb View Post
Thanks,

But is there any way for me to find tires with these rims in which I would not have to roll fenders??

I was told by the company where i bought my rims that these 18" rims would fit on my 330i even with the cupkit...

Am I mistaken??
You can run 18" wheels without any issues, but that's a really vague statement. 18" wheels will range in size, could be 18x7 to 18x12 for example, and then you have to factor in the offset of the wheels.

We recommend 18x8.5 ET35 to ET40 front, and 18x9.5 ET45 rear for a staggered setup. Your wheels would stick out about 6-11mm further than our recommended specs up front, and about 4mm further out in the rear. If you are not planning on running a stretched tire you will likely need to roll your fenders.
__________________
Sales @ VMR | Wheels
Tel: 714-442-7916 | Email: sales@velocitymotoring.com

Facebook! | Flickr! | Blog! | Instagram!
New for 2014: V702 Multispoke | V810 Flow Form

Last edited by VMRWheels; 01-15-2013 at 11:49 AM.
VMRWheels is offline   Reply With Quote