E46Fanatics - View Single Post - HID Fog Light install: question about ground wire
View Single Post
Old 01-17-2013, 05:19 PM   #12
Registered User
Join Date: Nov 2010
Location: Rockland county, NY
Posts: 1,793
My Ride: 04 M56,LC 100,RX300
Send a message via AIM to rizwan1377 Send a message via MSN to rizwan1377 Send a message via Yahoo to rizwan1377
Originally Posted by Kris.R View Post

Ok guys so what I ended up doing was joining the two ground wires from each harness and ran a longer wire to the negative battery post to the terminal. Everything fired up!

P.S. I tried loffa's method (of which I appreciate the input) but in my case, I got the infamous instrument cluster light flicker/blip. If you have ever experienced this you know that the cluster's high beam icon flickers once very quickly, and in turn can possibly cause damage to the ECM.
I used the ground from the bumper carrier(reinforcement), there are 2 13mm nuts on each side of the carrier.
I have the same issue with the high beam icon flickering.

Sent from my ADR6425LVW using Bimmer App
rizwan1377 is offline   Reply With Quote