View Single Post
Old 01-22-2013, 02:00 PM   #37
Registered User
Join Date: Jul 2012
Location: Illinois
Posts: 2,158
My Ride: BMW 323i Sedan
Originally Posted by trj View Post
With ET20 as offset, you are going to have 20mm extra wheel coming out of the fender well.
You might have to run thinner tires and roll the fenders.
Yes the wheels will work with hubcentric adapters.

Those wheels on the second link look good, but do you really want to go through all the trouble of hubcentric adapters, rolling fenders and all?

I would save the money and buy some other wheels thats more of a direct fit.

Most people use about 10mm spacers to get the aggressive look but 20mm is a bit too much.

Imagine your wheels coming out by 20mm from the current position(or measure 20mm from your current wheel) that is if your current wheels are of ET40 offset and see where you will end up. If you think its not going to rub, then go for it. But still you have to buy the hub centric rings and the bolts.
If I get the hub centric adapters, do you think these will rub:/ I really want the 17's
trentcdrums is offline   Reply With Quote