View Single Post
Old 01-22-2013, 06:16 PM   #2
Registered User
Join Date: Nov 2009
Location: Fairfax, VA USA
Posts: 16,654
My Ride: 330CiC, M5, X5
You MUST plug the OBD connector into the car because the interface components in the adapter are not USB powered, they are powered via the cars 12 Volts from the OBD connector.

When you do that you should see the drivers actually install.
Solve your misfires, lean codes, rough idle -

Fuel pump failures -

Temp Info -

Hidden OBC Menu - Check Voltage, Temp, Fuel Level -

E46/E39 GM5 Door Lock Info -

Lower hose temp switch O-ring - BMW #13621743299
jfoj is online now   Reply With Quote