E46Fanatics - View Single Post

Diabolu$ · 02-02-2013, 11:47 AM

Hi all!
Im AA stage1 user and it is good

But since i decided to renew my engine i have idea t make custom stage 3+ setup.

So, im going to use 70mm pulley, who could tell me, how much PSI can Rotrex do? I think i will do engine rev limit at 7200-7500RPM.

I will rebuild (tune) engines head, upgrade oil pump, engines cooling system and I have forget pistons 9,5compression

I want run around 14PSI

And one more question, what fuel pump i should use:
1. AEM 320 LPH Fuel Pump
2. Aeromotive 11142 340 LPH

Thank to all!

02-02-2013, 11:47 AM	#1
Diabolu$ Registered User Join Date: Mar 2010 Location: Moscow Posts: 24 My Ride: 330 ci supercharged View My Garage	330 custom supercharged questions Hi all! Im AA stage1 user and it is good But since i decided to renew my engine i have idea t make custom stage 3+ setup. So, im going to use 70mm pulley, who could tell me, how much PSI can Rotrex do? I think i will do engine rev limit at 7200-7500RPM. I will rebuild (tune) engines head, upgrade oil pump, engines cooling system and I have forget pistons 9,5compression I want run around 14PSI And one more question, what fuel pump i should use: 1. AEM 320 LPH Fuel Pump 2. Aeromotive 11142 340 LPH Thank to all!