Txs for the tips. I got it tight by duck taping a 40 coarse sandpaper on the 22mm deep socket. Then used a c-clamp to tighten it. I got 3 to 4 threads on the top and bottom slope fits tightly. I will check it once i bring her to ground.
Sent from my DROID4 using Bimmer App
My ride - 99/328i, Manual
DIY courtesy to this forum
Dec 2011 - window regulator, vcg, vanos seals, fuel filter, PS hoses+resorvoir, water pump, wp pulley, belts, thermostat, spark plugs, springs, FCAB & RCAB
Aug 2012 - Driver & Passenger Seat Belt Tensioner to fix Airbag light
Dec 2013 - Rear Diff & subframe bushing, Shocks & Struts, Wheels