View Single Post
Old 02-13-2013, 02:53 PM   #5
Viral@ActiveAutowerke
Sponsor
 
Viral@ActiveAutowerke's Avatar
 
Join Date: Nov 2008
Location: Miami, Florida
Posts: 1,124
My Ride: E46 M3
Quote:
Originally Posted by Diabolu$ View Post
Hi all!
Im AA stage1 user and it is good But since i decided to renew my engine i have idea t make custom stage 3+ setup.

So, im going to use 70mm pulley, who could tell me, how much PSI can Rotrex do? I think i will do engine rev limit at 7200-7500RPM.

I will rebuild (tune) engines head, upgrade oil pump, engines cooling system and I have forget pistons 9,5compression


I want run around 14PSI

And one more question, what fuel pump i should use:
1. AEM 320 LPH Fuel Pump
2. Aeromotive 11142 340 LPH


Thank to all!
By using a 70 MM Pulley Kit will be reaching the limits of the Rotrex Blower and my over spin the charger. Also raising the redline over 7,000 RPM is not advisable on this vehicle.
__________________
Viral Vahia
Active Autowerke | 9940 SW 168 Terrace Miami, Florida 33157
www.activeautowerke.com | viral@activeautowerke.com
Phone: 305.233.9300 Ext. 232 | Fax: 305-253-8921

Last edited by Viral@ActiveAutowerke; 02-13-2013 at 05:02 PM. Reason: Auto-save 1360796546
Viral@ActiveAutowerke is offline   Reply With Quote