View Single Post
Old 02-20-2013, 11:02 AM   #12
taylor192
Registered User
 
Join Date: Feb 2012
Location: The Best Place on Earth
Posts: 1,655
My Ride: 2003.5 M3
Soldered in new wire for all 4 leads at the bend to be safe since 3 wires were close to breaking, yet all 4 showed continuity to the plug . Thus I suspect something is wrong between the bend and the latch, so I'll have to remove the latch cover to investigate.

Also found a problem with the storage cover latches. They are controlled by cables which need to be pulled out of the way to remove the top. In doing so they became tangled at the motor not allowing the latches to work properly.
taylor192 is offline   Reply With Quote