View Single Post
Old 02-22-2013, 03:08 AM   #2
Registered User
mkodama's Avatar
Join Date: Oct 2006
Posts: 33,142
My order of operations would be something like:

0. Decide budget.
1. Determine what RPM to make peak power.
2. Find or have a camshaft made that will make peak power at that RPM.
3. Determine what type of fuel will be used find an appropriate dynamic compression ratio to run with that fuel.
4. Use camshaft specs and desired dynamic compression ratio to get the correction static compression ratio.


mkodama is offline   Reply With Quote