View Single Post
Old 03-02-2013, 04:18 PM   #6
Registered User
Join Date: Mar 2012
Location: Elk Grove, California
Posts: 89
My Ride: 04 330CI Convertible

Originally Posted by haris23 View Post
Alright, so I have installed subs and amps for quite a long time. But I have never dealt with a LOC (line out converter). I have a 2002 325i, non HK system. I have a line out converter, (Raptor LOCA25 to be exact). The damn thing did not come with any instruction manual at all. Thus far, I tapped into my left 6X9, and wired the LOC. It came with 5 wires to use, a brown which I assume in a ground, a white and white with stripe, and a black and black with stripe. I am assuming the ones with stripes are the negatives. My amp turns on no problem, RCAs are connected, grounds are good. But I am not getting any sound. What am I doing wrong? I faded the sound to the rear speakers as well and no subs.
What kind of amp do you have? Check your amp to see if it has a hi-level (speaker level input). If you do, then you don't even need the LOC in the first place. Hi-level input has superior quality.
joshism is offline   Reply With Quote