View Single Post
Old 03-12-2013, 03:29 PM   #225
Kris@TSS
Sponsor
 
Kris@TSS's Avatar
 
Join Date: May 2012
Location: Fresno, California
Posts: 569
My Ride: 2005 BMW 545i
Looks nice.

Do not over tighten the set screw. Maximum torque is 1 - 2 Nm (0.74-1.47 ft-lb).

Front
Tightening torque for the piston rod nut is 50 Nm (37 ft-lb). Use the manufacturers recommended torque settings for installation of the strut and all other fasteners that attach the suspensions to the vehicle.

Rear
Tightening torque for piston rod nut is 25 Nm (18 ft-lb).
__________________
Kristina "Kris" Ash
General Manager
The Suspension Source
1-888-230-1288
kristina@thesuspensionsource.com
www.thesuspensionsource.com
Kris@TSS is offline   Reply With Quote