View Single Post
Old 03-17-2013, 11:54 AM   #10
Z3r0115
Registered User
 
Join Date: Mar 2012
Location: fontana
Posts: 36
My Ride: 300zxtt
i bled the lines from the slave cylinder i was unlocking the bleed screw after my partner has finished pumping the pedal 5 times. release then lock and repeat until all air bubbles were gone in the air tube.

I think i found the problem though. I have a SAC. its a 2000 323i and we removed the locking mechanism from the pressure platebefore installing it to the flywheel. Did some research and apparently you are not supposed to remove it. Now i dont have the special tools to lock the pressure plate again so im going to have to look for a new pressure plate first time im doing a SAC so i feel like a noob for removing that.
Z3r0115 is offline   Reply With Quote