View Single Post
Old 03-19-2013, 11:22 AM   #57
basketthis
Registered User
 
Join Date: Jan 2011
Location: East Coast
Posts: 299
My Ride: state to state
Quote:
Originally Posted by smooth1 View Post
Try clearing adaptations as mentioned in the other thread. Also make sure the coils are correctly plugged in. Other than that I need a full warmup log to 180. And if you have a tune you need to mention that because your timing is all over the place at idle.
I'm not clear on what adaptations are. I'm assuming that's the engine codes. And, I've cleared them 3 times. I don't have a tune, so no worries there. I previously left the camshaft position sensor plug off. It was obvious because the code threw. After plugging that in and clearing it, I've been getting the codes in the link I posted. Sorry that I'm not familiar with adaptations...
basketthis is offline   Reply With Quote