View Single Post
Old 04-22-2013, 10:54 PM   #6
ccaudio1
Registered User
 
Join Date: Feb 2013
Location: california
Posts: 93
My Ride: 330i
ground the amps to the battery. next run the RCAs away from any factory wires. try to avoid running it parallel with the factory wire. that should eliminate the groundloop noise your getting. also check you gain settings on the amps.

@ albarran9.. pls explain cheap metal strands that cause distortion and noise. Also clean signal is generated from the source unit and not from the rca. as far the rca you listed as good MONSTER Cable is the only one i see as good... all the other you have listed are made in the same... if you dont believe me cut them and look inside. not flaming just stating the obvious.
__________________
Ride: 2001 330i
Radio: Clarion NX500
Amps: Diamond Audio
Speakers: DLS Audio
Subwoofers: (2) 12" MB Quarts

MODS: Coming Soon
ccaudio1 is offline   Reply With Quote